Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Jacks for a fish house
jd


Member

Status: Offline
Posts: 19
Date:
Jacks for a fish house
Permalink  
 


I need help, I just picked up my first fishhouse, its 10x16 what kind of jack should I get.  to jack it up?confuseconfuseconfuseconfuse

__________________


Member

Status: Offline
Posts: 137
Date:
Permalink  
 

I got mine from Northern Tool. Cost less than a $100. It's like a heavy duty older car bumber jack, sits on a metal plate, one post comes up from the plate and a jack mechanism goes up and down the post. There is a metal finger on the jack mechanism that matches up well with brackets on the end of my skids that I jack my house with. They have two different priced ones there of this style. An employee said the cheaper one was a poorer quality metal and to buy the better one. Which I did. This is my first year with a ice house but so far its worked well.

When I first asked what type of jack to buy Jason ( from Hunter's ) suggested a railroad jack. I couldn't find one. If you can find one I believe they are very heavy duty and would lift any ice house. I have no idea how much they would cost.

Isle Discount Supply, the lumber yard across the street from Portside Bait also makes a lifting bracket for skids. It mounts on the side of the skid, has holes punched for mounting and a hole for the jack. Its a simple design made from angle iron. These are not jacks, just simple brackets for a jack to hook up to and lift the house. If you don't have good lifting points on your house you may want to look into something like these.

Other more experienced people here may have better suggestion for you.

Good luck



__________________


Admin / Moderator

Status: Offline
Posts: 1254
Date:
Permalink  
 

iwalleye, what your discribing is what is called a " hi-lift " jack. You can find them in most fleet farm stores!

__________________

 


Bob (Bobber) Carlson

 

 

 



Member

Status: Offline
Posts: 137
Date:
Permalink  
 

Bobber wrote:

iwalleye, what your discribing is what is called a " hi-lift " jack. You can find them in most fleet farm stores!




 Yep that it.smile thanks



__________________
jd


Member

Status: Offline
Posts: 19
Date:
Permalink  
 

thanks for all your help, that will help me, thank you

__________________


Member

Status: Offline
Posts: 121
Date:
Permalink  
 

Be very carefull with those hi lift jacks on ice they can hurt ya if they kick out on ya.I use a track jack but they are hard to find.A hydraulic rolling car jack also works very well and a lot safer.

__________________


Member

Status: Offline
Posts: 31
Date:
Permalink  
 

Ditto to what 2050Skeeter said..
We used to call our Hi Lift jack the "widow maker".....very dangerous.  It slipped on the ice once and punched a hole in our shack....counted our fingers and we threw it away the next day.  Borrowed a railroad jack which was the ticket for a while then we bought a low profile floor jack that worked very well.



-- Edited by Tyeee on Thursday 28th of January 2010 06:55:15 AM

__________________


Newbie

Status: Offline
Posts: 1
Date:
Permalink  
 

We have a 10 x 20 house with a steel frame and runners.  We welded in 4 jacks that are used to jack up trailers off of hitches on each corner of the house.  They have about a six inch stroke with a ratio of something like 20 turns of the crank per inch so jacking takes a while but requires very little strength.  We love them.

__________________


Member

Status: Offline
Posts: 137
Date:
Permalink  
 

Wow! Sorry jd. Looks like I gave you bad advise. no   Tyeee, Skeeter is there anything I can do to minimze the slipping? What's a track jack?



__________________


Member

Status: Offline
Posts: 5
Date:
Permalink  
 

Be very careful with the Hi-Lift jacks as others have mentioned.  I use a railroad jack that works great and is much safer.

__________________


Member

Status: Offline
Posts: 31
Date:
Permalink  
 

We popped some nails thru a 12"x 12" piece of wood and stamped it into the ice before we set the jack down.  Seemed to hold much better but that thing still spooked us. 

Keep your eyes open for a railroad jack. 

The heavy duty low profile jack worked well too!

__________________


Member

Status: Offline
Posts: 25
Date:
Permalink  
 

Another thought for blocking house. I have 10 x 16 with steel runners. I welded 5000 lb trailer tongue jacks ( a little over kill ) on each corner of house.
One person can block the house in about 15 min. 
Totally safe. no slippage.

OOPS I see skibob already gave you this advise. disregard



-- Edited by Sweetlips on Monday 1st of February 2010 08:24:06 AM

__________________

Keep yur tips up n yur powder dry.



Member

Status: Offline
Posts: 121
Date:
Permalink  
 

iwalleye wrote:

Wow! Sorry jd. Looks like I gave you bad advise. no   Tyeee, Skeeter is there anything I can do to minimze the slipping? What's a track jack?



You didnt really give bad advice a lot of guys use those Hi lift jacks.But you have to be very careful with them.Problem is if you try to jack the house up to much at a time and the jack leans and kicks out.

Track jack and what some guys call a railroad jack are the same.Kind of hard to explain but a lot of the resorts use them.Maybe someone here has a pic of one.Not sure who sells these but someone here might know.Something like a 5 ton hydraulic low profile rolling car jack are cheaper and also work very well and are nice to have in the garage at home.I have both and actually the hydraulic car jack is probably faster and easier to use but you have to have 4-5 inches of clearance to start to get it under your hoause.A track jack only needs a couple inches of clearance.

 



__________________


Member

Status: Offline
Posts: 5
Date:
Permalink  
 

Here is a link:  http://www.tksimplex.com/  Click on products then on ratchet jacks.  Like I said very easy to use, light weight, and safe.

__________________


Member

Status: Offline
Posts: 109
Date:
Permalink  
 

I have been reading through this post and saw where a couple folks talk about welding on trailer tongue jacks on each corder of their fish house. Does anyone know if someone around the Mille Lacs area does this? I am looking to have this done to my 12'x24' ice house. Any advice would be greatly appreciated.



__________________
John H.


Malmo Bay Bomber

Status: Offline
Posts: 1502
Date:
Permalink  
 

Call Wyatt Tramm: 
Address: 34994 State Hwy 47, Isle, MN 56342
 
 
Hours:
Open ⋅ Closes 4:30PM
Monday6AM–4:30PM
Tuesday6AM–4:30PM
Wednesday6AM–4:30PM
Thursday6AM–4:30PM
Friday6AM–4:30PM
SaturdayClosed
SundayClosed
Suggest an edit
 
 
Thanks for your feedback.

Your responses help to improve the Google Search experience.

Note: Your feedback won't directly influence the ranking of any single page.
Learn more

Done
 
 
 

Call Wyatt Tramm at Tramm's Welding/Maanufacturing on Hwy 47. I sure he can do it or advise you accordingly. 

The are a few minutes south of Isle on Hwy 47. There are other welders in Isle, but Wyatt has a beautiful shop.

http://www.trammarches.com/

 

Image



__________________
Take care
Come Walleye  
Malmo Mike Callies
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard