Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Building a Skid house/Summer cabin


Newbie

Status: Offline
Posts: 3
Date:
Building a Skid house/Summer cabin
Permalink  
 


Hi All,

I am in the planning stages of building a skid house that will also be used as a summer cabin at one of the Lakes resorts.  The planning has been going well and I have a couple different designs/layouts in mind, but I am not sure what to do with my floor and could use some help.

I plan on building the base of the house out of treated 2x6's and then laying down treated plywood on top of that.  I was then going to put sheets of 3/4" rigid foam insulation followed by another sheet of treated plywood.  What I have been having trouble deciding is how thick of plywood I will need.  Could I get by with 1/2" for both sheets since the total floor thickness will be 1 1/4" or should I go thinker?

I am sure I will be checking back here often with questions and will post pictures of my build process too.

Thanks in advance!



-- Edited by calli4120 on Thursday 12th of March 2015 08:50:18 PM

__________________


Veteran Member

Status: Offline
Posts: 340
Date:
Permalink  
 

What size are you building?



__________________

 

save_mille_lacs_850.jpg



Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Thinking about a 10x20.

Still trying to decide on white oak or metal skids. I know the advantages and disadvantages of each and I think it will end up coming down to personal preference.



__________________


Veteran Member

Status: Offline
Posts: 340
Date:
Permalink  
 

A 2 x 6 floor with 1 x 2 strips at 3 1/2 inches will give you room enough for 2 inch foamular insulation underneath 3/4 inch green treated plywood. Before the flooring sheets are laid, sub-floor adhesive is used on both joists and insulation. There's no need to sandwich insulation like you described. That traps moisture and causes problems down the road.

Use sway braces for the walls to keep your framing square over the years. Get trusses that will allow for an overhang of 10".  Consider using metal for your roof. Always use real wood for your interior, whether it's paneling or tongue and groove. Use a moisture barrier and r-13 insulation before paneling.

T-111 makes the best siding material w/cedar trim. 

Here's one of my 10' wide builds with a couple ideas for you:

 



Attachments
__________________

 

save_mille_lacs_850.jpg



Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

Very nice looking house and great advice! I really apperciate the help.

__________________


Admin / Moderator

Status: Offline
Posts: 1254
Date:
Permalink  
 

Nice Jon,

 

And I agree on the floor layout...



__________________

 


Bob (Bobber) Carlson

 

 

 



Malmo Bay Bomber

Status: Offline
Posts: 1502
Date:
Permalink  
 

Great Information there, Jon, winkwinksmile

WOW! When can I move in please?

That is a beautiful house you have shown and built!

Malmo Mike likes it! great layout! MM biggrinbiggrinbiggrin

Here is where I go fishing in Lake Tahoe, California:

 



Attachments
__________________
Take care
Come Walleye  
Malmo Mike Callies
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard